RETURN TO HOME PAGE

Fill in as much of the following information as possible regarding your current-measuring requirement
Then submit it,
or print out and send by post or fax

Customer Enquiry Form

If you have a digital image of the waveform then please attach it to a separate email.   Or send a hard copy by fax or post.

Please note -- pressing the Return / Enter key, during data entry, will submit this form.

Mechanical

Maximum outside diameter (mm)

Maximum thickness (mm)

Minimum necessary internal diameter (mm)

Type of mounting (with or without feet)

Note: A limited range of split core ring-type designs is available for applications where it is not practical to thread the conductor through the instrument.   Some accessories are also available to facilitate bus bar mounting.   Other accessories include BNC cables and 50R feed-through resistors for the broadband range.

Sinusoidal Waveform

Frequency (Hz)

Peak primary current (amps)

Corresponding peak secondary current (amps)

Class or accuracy (%)

Burden or load impedance of the recording instrument (VA or ohms)

Non-sinusoidal Waveform

Repetition rate, pulses per second or single shot

Mean dc component of primary current (amps)

I-t value of pulse waveform (amp seconds)

I-t capability can be enhanced or transformer size reduced by the application of a dc bias or reset pulse

Can the application of a dc bias or a reset pulse be considered?

Voltage sensitivity, voltage output per amp of primary current (V/A)

Low frequency 3dB cut-off points (Hz)

High frequency 3dB cut-off points (Hz)

Accuracy required (+/-  %)

Contact information

Name

Company

email

Address 1

Address 2

Address 3

Telephone

 

Message or other relevant information

Lilco Ltd., Diamond House, Stenness, Orkney, KW16 3JX,  United Kingdom
Tel: 01856 850 179
International Tel: +44 1856 850 179
Fax: 01856 851 291